This page answers common questions about matters, clients and contacts in Legalsense, such as archiving, matter numbering and changing many matters at once. For an overview of working with matters, see the article ↪ Matter management.
In this article
- 01Why don't the name of the organization and the contact person appear above the address?
- 02How do I block the writing of time on a matter?
- 03How do I set a capped price in combination with a lower hourly rate?
- 04Why can't I archive this matter?
- 05What does the "two main debtors" error mean and how do I fix it?
- 06Can I change matter numbering or the number in series myself?
- 07Can I change many matters at once?
- 08Can I reopen (unarchive) a matter that has time entries on it?
- 09Why don't my changes in ContactManager show up in Legalsense?
Why don't the name of the organization and the contact person appear above the address?
If a client's organization name or contact person isn't showing above the address (on a letter or invoice, for example), check the address template and the contact person on the matter.
Legalsense builds the printed address from the address fields, the organization name and the contact person, following the address's Address template:
- The organization name is always printed above the address, except with the template Specify manually. That template prints the address exactly as you entered it.
- The contact person is only printed when a contact person is selected for the debtor on the matter, and the address template has an attention line: NL T.a.v., NL T.a.v. voornaam, UK (Attn.), DU (z. Hd.), USA (Attn:) or International (Attn:). The templates NL, UK and USA don't print a contact person.
- Click the client's name under Contact information on the client page. The contact page opens.
Contact information section on a client page, showing the client name link used to edit address details.
- In the Addresses section, click New address to add a separate address for the client.
-
In the Address kind field, choose from:
- Main address
- Mailing address
- Visiting address
New address window on a contact page, showing the Address kind field with the Main address, Mailing address and Visiting address options.
- Fill in the address fields. To show more or less address information, choose a different Address template.
- Click Save.
New address window, showing the Address template field and the address preview below it.
Legalsense composes the printed address from whichever fields you've filled in.
To add contact persons, go to the Contact persons section on the contact page. Click Add existing contact person to link a contact that's already in Legalsense, or click New contact to enter a new contact's details in the Add contact person window. Then select the contact person for the debtor on the matter: in the matter's Debtors section, edit the debtor and choose the Contact person.
Contact persons section on an organization's contact page, showing the Add existing contact person and New contact buttons.
Note: The Contact persons section is only shown on the contact page of an organization.
How do I block the writing of time on a matter?
Sometimes you need to stop timekeepers from writing time on a matter, for example if the client isn't paying or the matter's budget has been reached. You do this by blocking billables on the matter. You can block only new time entries, or all billables: new time entries, but also new disbursements, trust account transactions you enter in Legalsense, and scheduled subscription products on the matter. Entries that already exist on the matter aren't affected.
- Go to Matters → Matters and open the matter.
- In the Processes section, click the pencil icon next to Blocked billables.
Processes section on a matter page, showing the Blocked billables heading with the pencil icon and the text Billables are not blocked.
- Under Blocked billables, choose Time entries to block only time entries, or All billables to block all billables. If you want, enter the reason in the Comments field.
- Click Save.
Blocked billables window, showing the Blocked billables field set to All billables and the Comments field.
Under Blocked billables, the matter page now shows "Time entries are blocked." or "All billables are blocked.", followed by your comments. Timekeepers who try to write time on the matter see "Time entry on this matter is blocked."
Processes section on a matter page, showing All billables are blocked with the comment below it.
To allow time entry again, follow the same steps and choose None under Blocked billables. Legalsense removes the comments when you unblock the matter.
Note: If you've chosen None but Blocked billables still shows "All billables are blocked.", the matter's status blocks billables. Give the matter a different matter status, or ask your Legalsense administrator to check the status under Settings → Lists → Matter statuses. To block billables on several matters at once, see the question about changing many matters at once on this page.
Note: If you don't see the pencil icon next to Blocked billables, you don't have permission to block billables. Ask your Legalsense administrator or contact Legalsense Support.
How do I set a capped price in combination with a lower hourly rate?
Use this approach if you want a matter's capped price to be valued against an hourly rate that's lower than your standard rates, rather than against the default rates.
To do this, first create a price template with the lower hourly rate you want to use. You can then set the capped price on the matter and select that price template as the scheme below the cap.
Matter edit form, showing the Pricing scheme field set to Capped price and the Scheme below cap field with the lower-rate price template selected.
For more information about setting up a capped price, see the article ↪ Setting up the pricing scheme Capped price. For more information about creating price templates, see the articles ↪ Price templates and ↪ Pricing schemes.
Why can't I archive this matter?
Usually because something on the matter is still open. Legalsense only lets you archive a matter once its financial work is finished. When archiving fails, Legalsense shows a message that lists every reason that applies, for example: "Matter 20260012 cannot be archived because there are draft invoices for this matter."
Archive matter window on a matter page, showing the message that explains why the matter can't be archived and the Archive anyway checkbox.
The message contains one or more of these reasons:
- "there is unbilled time or there are unbilled disbursements": the matter still has work in progress (WIP), such as billable time entries, disbursements, products or advances that haven't been invoiced. Invoice the WIP, write it off, or make the entries non-billable.
- "there are draft invoices for this matter": finalize or delete the draft invoices on the matter.
- "there are unpaid invoices": register the payments, or write off what's left. See the article ↪ Mark an outstanding amount as uncollectable. You only see this reason if your firm tracks invoice payments in Legalsense.
- "there is still an open amount on the trust account": settle the trust account balance for the matter. You only see this reason if your firm uses trust accounting.
To archive the matter:
- Go to Matters → Matters and open the matter.
- Click Extra and then Archive.
- Read the message and solve each reason it lists.
- Click Extra and then Archive again.
Archive the matter anyway
If you're sure the matter should be archived as it is, select Archive anyway in the Archive matter window and click Archive. The checkbox appears after Legalsense has shown you why the matter can't be archived. When you archive several matters at once, Archive anyway is only available if all the selected matters are legal aid matters.
Important: Archiving anyway doesn't invoice or delete anything. Unbilled WIP and draft invoices stay on the archived matter, and you can't edit its time entries until you unarchive it.
If the archive number can't be assigned
If you leave the Archive number field empty, Legalsense assigns the next number in your archive number series. If that series has run out of numbers, archiving fails with an error. Enter an unused archive number yourself in the Archive number field, or contact Legalsense Support to extend your archive number format. You can't change the format yourself.
If the matter has two main debtors
See the next question on this page, about the "two main debtors" error.
Note: If you don't see Archive under Extra, you don't have permission to archive matters, or archiving isn't enabled for your firm. Ask your Legalsense administrator or contact Legalsense Support. For more about archiving, see the article ↪ Archiving.
What does the "two main debtors" error mean and how do I fix it?
It means the matter's debtor data has ended up in a state Legalsense doesn't expect. A matter always has exactly one main debtor: the debtor whose split is set to Full / remaining amount. The main debtor pays whatever the other debtors on the matter don't. If two debtors are both set as main debtor, actions that use the debtors, such as archiving the matter or editing its debtors, can fail.
Legalsense normally keeps this right for you. When you set another debtor to Full / remaining amount, that debtor becomes the main debtor and Legalsense changes the previous main debtor to a percentage or an amount. A matter with two main debtors therefore usually needs a correction in the underlying data, which you can't make yourself.
To check the matter:
- Go to Matters → Matters and open the matter.
- In the Debtors section, check the split of each debtor.
- If more than one debtor shows Full / remaining amount, or you get an error when you edit the debtors, contact Legalsense Support with the matter number. Support corrects the debtor data for you.
Debtors section on a matter page, showing the main debtor without a percentage and two other debtors that each pay 25%.
Note: You can't delete the main debtor. Legalsense shows "You cannot delete this debtor because it is the main debtor of this matter." To replace the main debtor, first edit another debtor and set its split to Full / remaining amount. You can then delete the old debtor. For more about debtors on a matter, see the article ↪ Splitting invoices over multiple debtors.
Can I change matter numbering or the number in series myself?
Partly. You can give a single matter a different number yourself, but you can't change the numbering format or the next number in the series. Only Legalsense Support can change those. The same applies to client numbers.
Change the number of one matter
- Go to Matters → Matters and open the matter.
- Click Edit.
- Enter the new number in the Number field. The number must fit your firm's numbering format and can't already be in use.
- Click Save.
Matter edit form, showing the Number field and the Exclude from numbering checkbox.
If the number doesn't fit the format, Legalsense shows "Enter a valid value" with an example of a valid number. Users with the permission to override matter numbers get a warning instead, and can confirm that they want to use the number anyway. If another matter already has the number, Legalsense tells you so.
Important: If you enter a number that fits your numbering format, Legalsense continues the series from that number. For example, if the last matter was 20260120 and you enter 20260500, the next new matter gets 20260501, and you can't lower the series again yourself. To give a matter a one-off number without affecting the series, also select Exclude from numbering.
Note: If you don't see the Number field when you edit a matter, your firm uses fixed numbers, or the field is hidden in your firm's configuration. With fixed numbers, you can only set the number when you create a matter. Legalsense Support can tell you which applies, and can show the field again. Firms often use fixed numbers when Legalsense is connected to accounting software.
Change the numbering format or the next number
Contact Legalsense Support and tell them which format you want, with an example, and from which number the new series should start. By default, the new format only applies to matters you create after the change. If you want existing matters renumbered too, tell Legalsense Support.
Also contact Legalsense Support if you get "No more numbers available in the series" when you create a matter or client. Your numbering format has run out of numbers, and Support needs to extend it.
Can I change many matters at once?
For some settings, yes. In the matter overview, you can change the matter supervisor, billing supervisor, matter status and tags of several matters at once, and you can archive or unarchive several matters at once. You can also block billables (such as time entry) on many matters through their matter status. Other settings, such as rates, access, the anti-money laundering (AML/Wwft) check or the invoice language, you change per matter.
- Go to Matters → Matters.
- Use the filters to find the matters you want to change. Set Status to Active to change active matters, or to Archived to unarchive matters.
- Select the checkboxes of the matters.
- Click one of the buttons above the overview and fill in the window that opens.
Matter overview with several matters selected, showing the Archive, Tag, Matter status and Change supervisor buttons above the table.
Note: Which buttons you see depends on your permissions. If a button you need is missing, ask your Legalsense administrator or contact Legalsense Support.
Block billables on several matters
There's no bulk button to block billables, but you can block them through a matter status. Legalsense blocks billables on every matter that has a status with Block billables selected.
- Go to Settings → Lists → Matter statuses.
- Create a matter status, or edit an existing one, and select Block billables.
- Click Save.
- In the matter overview, select the matters, click Matter status and choose this status.
Matter status form under Settings → Lists → Matter statuses, showing the Block billables checkbox.
To allow billables again, give the matters a status without Block billables.
Settings you can't change in bulk
Change these settings on each matter's edit form:
- rates and price template
- access kind and the users with access
- the AML/Wwft check
- invoice language and currency
- practice area and matter type
- matter number
If you need to change one of these settings on a large number of matters, contact Legalsense Support. Tell them what you want to change and on which matters. An Excel export of the matter overview helps: set the filters and click Export. Support then checks whether they can make the change for you.
Note: Matters that use the client's pricing scheme follow the client's price template. To change the rates for all those matters, change the price template on the client instead.
Can I reopen (unarchive) a matter that has time entries on it?
Yes. Time entries don't stop you from unarchiving a matter. While a matter is archived, its time entries are read-only. If you try to edit one, Legalsense shows "You cannot edit time entries that are on an archived matter." Unarchive the matter to edit them again.
- Go to Matters → Matters and set Status to Archived.
- Open the matter.
- Click Extra and then Unarchive.
- Choose Retain archive number or Clear archive number, and confirm.
Unarchive matter window, showing the Retain archive number and Clear archive number options.
Legalsense makes the matter active again and removes its archive date. To unarchive several matters at once, select them in the matter overview and click Unarchive.
If the matter can't be unarchived
If the matter's client is archived, Legalsense shows "Matter … cannot be unarchived because the client … is archived". Unarchive the client first, then unarchive the matter.
Note: If you don't see Unarchive under Extra, you don't have permission to archive and unarchive matters. Ask your Legalsense administrator or contact Legalsense Support. For more about archiving, see the article ↪ Archiving.
Why don't my changes in ContactManager show up in Legalsense?
Because ContactManager decides when changes are sent, and Legalsense only shows a change after it has received and accepted it. If your firm uses ContactManager by Epona, ContactManager is the leading system for your clients, contacts and matters. ContactManager sends changes to Legalsense; Legalsense doesn't fetch them, and there's no sync button or sync log in Legalsense.
A change usually doesn't show up for one of these reasons:
- ContactManager hasn't sent the change yet, or sending it failed on the ContactManager side.
- Legalsense rejected the change because it doesn't meet Legalsense's rules, for example a debtor without an address, or a matter name that's already used for the same client. Legalsense then doesn't save anything and reports the error back to ContactManager. You don't see the error in Legalsense.
- The connection isn't allowed to make the change. ContactManager connects to Legalsense with a Legalsense user account. If that account doesn't have the right permission, for example to archive matters, or its password has changed, Legalsense rejects the change.
- The record is linked to a different record in Legalsense, so the change ends up on another client, contact or matter.
- The record has been deleted in Legalsense.
To find the cause:
- Open the client, contact or matter in Legalsense.
- Click the link in the ContactManager field. Check that it opens the same record in ContactManager.
- Check ContactManager for an error message about the change, solve it, and save the record in ContactManager again.
- If the change still doesn't show up, contact Legalsense Support. Tell them which record it is, what you changed, and when. Support can check whether Legalsense received the change and why it was rejected.
Contact page in Legalsense, showing the ContactManager field with a link that opens the record in ContactManager.
Note: When your firm uses ContactManager, Legalsense hides most buttons for adding and editing clients, contacts and matters. On a contact, Edit only lets you change a few fields that ContactManager doesn't manage, such as tags, the payment deadline and the invoice send method. Make all other changes in ContactManager. Changes you make in Legalsense aren't sent to ContactManager.
Comments
0 comments
Please sign in to leave a comment.